Sennheiser の真正性を確認する方法

About Sennheiser Authentication

Sennheiser, founded in 1945 in Hanover, Germany, is one of the most respected professional and consumer audio brands. The company split into two entities in 2022 — Sennheiser Consumer Audio (headphones and earphones, acquired by Sonova) and the professional division (remaining family-owned). The most counterfeited products are the Momentum 4 Wireless, Momentum True Wireless 3, IE 600, and IE 900 in-ear monitors. Fake IE 600 and IE 900 IEMs are documented as particularly sophisticated — counterfeiters replicate the packaging and accessories down to the cable hologram, but cannot replicate build materials or the proprietary transducer behavior. Sennheiser has stated publicly that it cannot verify authenticity from photographs or serial numbers alone; physical inspection is required for conclusive determination.

Key authentication signals

• Cable hologram on IE-series IEMs. Genuine Sennheiser IE 600 and IE 900 cables carry a small holographic security sticker on the Y-split: an "S" logo hologram that shifts color and displays a depth effect when viewed at different angles. Counterfeit cables attempt to replicate this sticker but produce a flat, non-holographic imitation — viewed under direct light, the counterfeit sticker shows a single fixed color with no angular color shift or depth parallax. This is visible to the naked eye without magnification.
• Cable sheath texture. Genuine IE-series cables use a smooth, uniform outer sheath with consistent diameter along the full run from earpiece to jack. Counterfeit cable sheaths have a twisted-braid appearance even where they should be smooth — the individual conductors beneath are visible as a slight ridged texture through the outer jacket. This is palpable when rolling the cable between thumb and forefinger.
• IE 600 / IE 900 nozzle interior color. On genuine Sennheiser IE 600 earpieces, looking directly into the sound nozzle shows a pitch-black interior with a fine mesh driver guard. Documented counterfeits reveal a silver or grey interior through the nozzle mesh — the mesh structure is also wider (fewer wires per millimetre) than on genuine units, resulting in larger visible openings in the guard.
• Ear tip stock tip presentation. On genuine IE-series accessories, the silicone tip storage card (the pinned plastic plate inside the case holding S/M/L tips) has glossy lettering for the size labels. Counterfeit tip boards use matte lettering at the same position. Additionally, genuine foam tips (supplied with IE 900) have flat tops — the center of each tip is flat, not convex. Counterfeit foam tips show a domed, bulging top surface.
• Momentum 4 serial location and app verification. On the Momentum 4 Wireless, the serial number is printed on the underside of the headband at the right extension slider. It is also accessible in the Sennheiser Smart Control app under Product Information. Counterfeit Momentum 4 units either omit the slider serial or fail to connect to the Smart Control app with the correct model identification. Sennheiser Consumer Hearing support (senh.sennheiser-hearing.com) can validate whether a serial is registered in their system.
• Security label generation (2018+ products). Sennheiser updated its product security labels in 2018. Genuine products carry a label with a security feature visible under UV light or with a specific micro-printing pattern. These labels show Sennheiser's corporate wordmark in a specific typeface at microscopic scale — counterfeit labels replicate the visual appearance under white light but omit or blur the micro-print under magnification.

Serial and reference numbers

Sennheiser serial numbers appear in three locations: on the original box barcode sticker, on the product itself (inside the headband slider for over-ear models; on the earpiece body for IEMs), and in the Sennheiser Smart Control app under Product Info for wireless models. Sennheiser Consumer Hearing support services can check a serial against their database — request this verification before purchasing second-hand high-value IEMs (IE 600, IE 900). The absence of any serial number on a claimed Sennheiser product is itself conclusive evidence of a counterfeit.

Common counterfeit red flags

• IE-series cable Y-split hologram shows flat, non-shifting color — no angular depth effect visible.
• Cable sheath has a ridged, twisted-braid texture through the outer jacket rather than smooth uniform finish.
• IE 600 / IE 900 nozzle interior is silver or grey rather than pitch black, or mesh openings are visibly wider.
• Foam ear tips have a domed convex top rather than a flat surface.
• Momentum 4 slider lacks a serial number, or Smart Control app does not recognize the model.
• Security label shows no micro-print under 10× magnification.